How to fix Norton Setup nu16 ‘damaged disk driver or system files’ error?

Are you facing any Norton nu16 error in your Mac OS and getting alerts like the damaged disk driver or the system files? Read this below article to get help regarding the issues.

Norton nu16 error

 

Straightaway, replacing the disk driver might be risky because if any of the steps gets wrong, it may be formatted to the Startup Disk. The correct procedures may vary according to the disk drive manufacturer and you need to consult the user’s guide that came along with the hard disk, for further instructions.

You need to visit Norton.com/nu16 for downloading the Norton Utility software.

Follow the steps as listed below to replace the damaged disk driver-

  1. Switch on your Mac OS
  2. Use the particular disk that contains the setup utility and use the same for formatting the hard disk.
  3. Open the Norton Utility 16 application.
  4. Search for ‘Update or Reinstall Driver’, after you’re done with locating the volume.
  5. Select ‘Update Driver’ in Norton Drive setup.
  6. Search for an update or replace driver feature in the Norton Utility and select it, after you are sure of the following things
  • Choose the correct volume for the Norton Driver update.
  • Update the Norton Driver, wouldn’t cause the volume to be initialized. If the Norton utility 16 warns you about the same then there is no need to proceed further.
  1. Reboot your Mac OS after you have successfully completed updating the Norton Driver.
  2. Run Norton Disk Doctor, to make sure no other issue persists.

Replacing the damaged system files in Mac OS might remove any special system beep sound, which you have installed in the damaged system file. In order to get rid of this issue, you need to refer your Mac OS user’s guide and follow the correct steps to perform a clean System install.

For installing any Norton products, you need to visit norton.com/setup.

Save

What is ‘Norton search safe ’ and How to enable it?

If You happen to have used or happen to be using Norton antivirus, then there is a high probability that you have come across this term- Norton safe search. Either way, let’s take a brief tour around Norton safe search and see what it entails.

So, what exactly is this Norton safe search?

Purchasing an antivirus and having it come with a few extra features isn’t a new thing for most folks. Norton safe search happens to be one of the extra features that tag along with Norton antivirus. Anyway, what exactly is this Norton safe search? How can you describe the Norton safe search?

Well then, Norton safe search is a search engine developed by Norton with the sole intent of preventing their users from visiting risky or malicious websites that may be among the sites listed in the results. Norton safe search makes use of Safe Web technology by Norton, which ranks and rates sites according to how safe they are. Norton Safe Search can be purchased online or from any other relevant outlet that provides Norton’s security products.

Is there a difference between this search engine and other popular search engines?

Basically, Norton safe search functions just like all the other common search engines. However, the only factor that portrays its uniqueness is the added security layer that helps protect the user. Norton safe search can be used to find maps, online content, shopping sites, Wikipedia info extract among others. The difference comes in when the results have been fetched then the engine filters them according to their security assurance.

How to enable Norton safe search

Now, there are quite a number of web browsers that support Norton safe search. Among these are the most popular web browser used by a lion’s share of computer users all across the entire world, Chrome and Mozilla Firefox browsers.
If you are using Chrome as your default browser, here is the step-by-step procedure that should guide you in enabling Norton Safe Search in Chrome:

1.Launch the Norton application and open the settings window.

2.In the settings menu, click detailed Settings, click Identity

3.In the next window, you will also see another setting icon at bottom, click on it.

4.Next, click General, and select your browser, Google Chrome. Just below it, you will see install Extension’. Click on it and let the installation process complete.

5.After it is done, open the Chrome browser. In the extension section, locate a certain radio button that should be of Norton Safe Search. Click on it to enable the engine.

Now, you need to keep in mind that the procedure is quite similar when dealing with a different web browser. Actually, the first three steps are exactly the same. The only notable difference comes in when you are prompted to choose your browser. When handling that step, ensure that you choose the right browser for an extension of the same to be fetched.

Summary
In conclusion, it is safe to say that Norton Safe Search is quite useful when browsing. As of now, one of the biggest problems faced is cybersecurity. This is also facilitated by the fact that technology keeps changing constantly. Installing and enabling Norton Safe Search should go a long way in ensuring that you are well protected online.

About us :-

After visiting the www.norton.com/setup, access your account, manage your subscription, and extend your Norton protection to PC, Mac, Android and iOS .

How to Reset Google Chromecast

Google Chromecast is without a doubt an unheard of level of online video spilling in your TV. All things considered, Google is known for its surprising administrations and Chromecast being its item is appreciated extremely well. Despite the fact that, made by a prestigious organization, Chromecast additionally can have issues and issues which you may need to investigate. Now and again, Chromecast thinks that its difficult to interface with a web association or some of the time doesn’t stream any substance on the gadget, and the dissatisfaction starts when you don’t know the purpose behind this sudden conduct of the gadget.

How to Reset Google Chromecast

Some users were able to deal with the problem as they performed a complete troubleshoot but most of the users still don’t know how to deal with the problem. Maybe you are also facing the same issue and looking for a solution for it. Don’t worry, resetting is a solution that you can efficiently perform and later reestablish the Chromecast connection with your devices. If you don’t know the steps to reset Google Chromecast, then follow the guide and troubleshoot the issue in a few minutes.

How to reset Google Chromecast

Before getting started, ensure that you have connected Chromecast with your TV or to Wi-Fi network.

  1. For those who have new Chromecast, open Home app on your phones.
  2. From the upper right corner, tap to open Settings.
  3. Tap to open a drop-down menu, again from the top right corner of the tab.
  4. Select Factory Reset.
  5. The will prompt you to confirm. Click Yes.
  6. If you have an older Chromecast, then the process can be different.
  7. Open Chromecast on your computer.
  8. In the Chromecast window, open Settings.
  9. Now select a Chromecast, if you have multiple of them, you want to reset.
  10. Now, click Factory Reset from the bottom of the window.
  11. Click Reset to confirm.

If in both, older and newer devices, the process to reset Chromecast fails, then there another way to reset the device. Sometimes, the problem rises to the extent that Chromecast doesn’t even connect with a device. In that situation how would you reset it? Well, there is a solution to that, and you will be able to perform the task quickly.

At the back of Chromecast USB port, you can find a small button. Connect the device with your TV and press that button for almost half a minute. You will notice a light blinked in the device indicating you to release the button. Wait for a few minutes, and the device will completely reset. Once the process is done, you can try initiating the process to setup Chromecast.

About us : –

Mir Ariif is a security expert and he writes about Cyber security, cryptography, malware, social engineering, internet and is working at www.norton.com/setup

The issue of PCs overheating has been around for a considerable length of time. The reason behind this is fairly basic. Workstation makers have been attempting a great deal to make their item handier and littler. Thus, keeping in mind the end goal to achieve their objective, they more likely than not began to make the parts, for example, the hard drive, motherboard and the sky is the limit from there, handier and littler and. Be that as it may, they additionally need to set every one of these segments and parts nearer to each other. As we as a whole realize that the microchip, hard drive, and motherboard these tend to create warm and the closer they are set to each other, the more thought the warmth progresses toward becoming. Despite the fact that, we have the fans that are incorporated with our workstations to chill these parts off, yet these fans additionally can’t work effectively in such tight quarters. Add to this the way that it’s less demanding said than improved the situation the warmth to get away, and you have overheating PCs. At whatever point your PC overheats, it will probably bomb in doing the assignments it is intended to. Here we have brought a few hints for you that will enable you to keep your Macintosh workstation from overheating. How to Prevent Your Apple Laptop from Overheating Avoid putting your laptop on anything like a cushion especially when it is switched on. The soft material of a cushion could get in the way of the airflow vents, mainly the rear vents, which could be the cause for your laptop to overheat. It is highly recommended not to put anything over your keyboard when the laptop is operating in the closed-lid mode. Doing so is expected to cause your computer to turn off and on frequently. And this could generate great heat and could also drain the laptop’s battery. Remember to shut down your laptop overnight and do it daily to let it cool off. If you don’t use it regularly during the day, then you can set it to go into standby mode automatically when not in use. This is definitely going to save power and also, condense heat output from the components of your laptop. Ensure that your laptop is always switched off when it’s in your backpack. You should avoid carrying the laptop in a bag when it’s on because doing so can block the vents on the computer and cause it to overheat. Also, it reduces the life of the components of your laptop or worse; can cause a fire. Thus, the heat may also distress the battery life and can cause an explosion too. Always try to keep the air vents clean. Dust accumulates on the vents of your laptop that can obstruct them. This dust will stop your laptop from working efficiently. A small electric cleaner can help you clean dust off the vents. Your laptops can suck up lots of dust. However, it’s because everything in the computer is packed together so tightly, it makes these specks of dust is even more dangerous for your laptop. When the cooling fans are designed to run all the time, it’s just a matter of time before the system starts overheating. Thank you for reading my article: I hope this information will be helpful to you. About Author : Nortoncomnorton is a security expert and he writes about Cyber security, cryptography, malware, social engineering, internet and is working at norton.com/setup

The issue of PCs overheating has been around for a considerable length of time. The reason behind this is fairly basic. Workstation makers have been attempting a great deal to make their item handier and littler. Thus, keeping in mind the end goal to achieve their objective, they more likely than not began to make the parts, for example, the hard drive, motherboard and the sky is the limit from there, handier and littler and. Be that as it may, they additionally need to set every one of these segments and parts nearer to each other. As we as a whole realize that the microchip, hard drive, and motherboard these tend to create warm and the closer they are set to each other, the more thought the warmth progresses toward becoming. Despite the fact that, we have the fans that are incorporated with our workstations to chill these parts off, yet these fans additionally can’t work effectively in such tight quarters. Add to this the way that it’s less demanding said than improved the situation the warmth to get away, and you have overheating PCs. At whatever point your PC overheats, it will probably bomb in doing the assignments it is intended to. Here we have brought a few hints for you that will enable you to keep your Macintosh workstation from overheating.

How to Prevent Your Apple Laptop from Overheating

  1. Avoid putting your laptop on anything like a cushion especially when it is switched on. The soft material of a cushion could get in the way of the airflow vents, mainly the rear vents, which could be the cause for your laptop to overheat.
  2. It is highly recommended not to put anything over your keyboard when the laptop is operating in the closed-lid mode. Doing so is expected to cause your computer to turn off and on frequently. And this could generate great heat and could also drain the laptop’s battery.
  3. Remember to shut down your laptop overnight and do it daily to let it cool off. If you don’t use it regularly during the day, then you can set it to go into standby mode automatically when not in use. This is definitely going to save power and also, condense heat output from the components of your laptop.
  4. Ensure that your laptop is always switched off when it’s in your backpack. You should avoid carrying the laptop in a bag when it’s on because doing so can block the vents on the computer and cause it to overheat. Also, it reduces the life of the components of your laptop or worse; can cause a fire. Thus, the heat may also distress the battery life and can cause an explosion too.
  5. Always try to keep the air vents clean. Dust accumulates on the vents of your laptop that can obstruct them. This dust will stop your laptop from working efficiently. A small electric cleaner can help you clean dust off the vents. Your laptops can suck up lots of dust. However, it’s because everything in the computer is packed together so tightly, it makes these specks of dust is even more dangerous for your laptop. When the cooling fans are designed to run all the time, it’s just a matter of time before the system starts overheating.

Thank you for reading my article: I hope this information will be helpful to you.

About Author :

Nortoncomnorton is a security expert and he writes about Cyber security, cryptography, malware, social engineering, internet and is working at norton.com/setup

Save

How to use volume recover with Norton Utility FileSaver files?

Norton Utility FileSaver files contain the details of your physical disk and the information related to it that is stored on it which allows the disks to be used. The FileSaver has two disk files in case a wrong file gets saved on any of the two files.

Norton Utility FileSaver

Every time you restart your Mac OS, FileSaver activates those files which were inactive in the previous session and updates the current file in the current session. In case the file gets damaged in this current session, you still have the information in the file that is saved on the previous sessions.

If your Mac OS is idle for most of the time then the Norton nu16 File Saver will every time switch to the active file in every 24 hours. If the Volume Information Files (VIF) was created with the previous versions of Norton Utilities for Mac OS, it will be used with the Mac 3.5 x and lower. And they wouldn’t be accessed with the Volume Recover and check whether you have the latest version of Norton Utility FileSaver.

Here, in this article learn about the use of volume recover with Norton nu 16 FileSaver files.

Follow the steps to look for the Norton Utilities FileSaver files-

  1. Choose any one of the following-
  • Select the ‘Volume Recover’ option in the Norton Utilities main window.
  • Select the ‘Volume Recover’ from Norton nu 16 menu-
  • Click on the icon of the disk where you wish to look for the Volume Recover icon.
  • Click on the ‘Volume Recover’ icon in the Norton tools folder.
  1. Click on the disk and select the ‘Search’ option.
  2. In case the located Norton nu 16 FileSaver isn’t for the volume you want to recover or you think there is more information in FileSaver for the volume then click on the ‘Search more’ option.
  3. Select the ‘most recent FileSaver rescue information file’, in case the located FileSaver rescue information is exactly for the volume you wished to recover.
  4. Click on the ‘Restore’ option, after selecting the Norton Utility FileSaver information file.

Be cautious, before progressing with the following-

  • Any of those files which are created after the recent Norton Utility FileSaver information file wouldn’t be recovered.
  • Any of the file which gets changed or deleted after the FileSaver information file will be recovered but it may get damaged.
  • You can’t just undo the process after it is done.
  1. To restore the FileSaver information on the selected volume, select the ‘Proceed’ option.
  2. Reboot your system. The restored FileSaver information will replace the current disk information.
  3. If you wish to select another FileSaver information file then go back to the step 4 and repeat the same process thereafter.

To download the Norton Utilities 16, you need to visit norton.com/setup

For More information click here : Norton.com/setup

Garageband for Windows System – Norton.com/setup

It is obvious that everyone loves music and all of them can create it. With the help of this software, you can also create a soulful, meaningful heartwarming music which everyone would like to listen. Garageband is one of the most trending applications and is famous among the artists. The application welcomes people to use their talent in music for free and create stuff like rock, classical, blues and pop as well. The application also provides the opportunity to practice mixing, recording audios, put sound effects in the audios and many more. Apple has officially developed it for Mac and iOS devices for music enthusiast, but it is also for the people using Windows system. Do you also want to keep the Garageband software application in your PC? Then first check its system requirements as follows.

Garageband for Windows System

The requirement for the software application

  1.    2GB Ram or more.
  2.    Windows 7 or its successors.
  3.    Minimum 2.3 free disk space.
  4.    Intel i3 or above.

There is no other application for Windows so don’t confuse it with other unofficial versions of Garageband. You can use iPadian to get the software in your PC. For those who don’t know, iPadian is recognized as the iOS emulator which helps you to get the application in your device. You can easily get access to the application to download it in your system.

Let’s see how to get Garageband in Windows system

  1.    Go to ipadina.net and download it for Windows.
  2.    Install the software in your system.
  3.    Wait for the installation to complete, it will appear on home screen.
  4.    Open the iPadian and go to the App Store to download Garageband for Windows.
  5.    Install it on your Windows system.
  6.    Wait for the installation to finish and enjoy creating music.

You can also use BlueStacks to download the Garageband in your system. The procedure is similar to iPadian, but you need to download BlueStacks in place of iPadian. By getting Garageband, you can easily create new music, especially those who are learners can figure new techniques and skills with Garageband. It will be amazing to have a great companion like this software application which every artist and music lover would want to keep.

About us :

www.norton.com/setup: Step-by-step instructions to download and install Norton setup by creating your Norton account on the official website and then using the Norton product key for its activation. If you face any error, then contact Norton customer support team on their toll-free number.

How to use Wipe Info for Norton nu16?

Wipe Info is one of the many parts of Norton Utility 16 (Norton nu16) and knows for smashing or deleting the entire data, unlike the other utilities of Norton which help you to protect, rescue, and enhance your data. It is recommended to use it, in case you’re sure enough that the file or folder doesn’t need to be recovered at any cost.

Wipe Info

Norton utility actually cleans up the unused space on the hard disk to make sure that no important data are present on any of such files like invisible, temporary, or unwanted. It completely removes the old data and writes or label over it as new and meaningless data.

Every time before Wipe Info performs the action, it asks for your confirmation. After it removes the entire data, you can’t recover it at any cost and calling up Symantec technician wouldn’t help you out. The Wipe Info allows you to access with Wipe File, Wipe Disk, and Wipe Unused Space, the three disk wiping operations.

In order to download any Norton products to enjoy its features, you need to visit norton.com/setup

Here, in this article learn about the Wiping Info and how it wipes the file or folder and the entire disk.

  • Wiping a file or folder

You can actually go for erasing a particular file or a folder that is packed up with the files. In order to do this alternatively in future, you can create a ‘Wipe Info Trash can’ on the desktop to erase the unwanted data without selecting Wipe Info every time.

Check out the steps to wipe a file or folder-

  1. Open the Wipe Info main window.
  2. Select the ‘Wipe File’ in the Wipe Info window.
  3. Choose and select the file or folder to delete it completely.
  4. Click on the ‘Wipe’ option.
  5. You’ll be asked for the confirmation on the choice, you made.
  6. Select the ‘Wipe’ option to remove the selected the file or folder, completely.

In order to install Norton utility 16 on your system, you need to visit Norton.com/nu16

  • Wiping an entire disk

The moment you choose Wipe Info, it deletes everything present on the disk. After your confirmation on the action, all the data on the disk will get removed, permanently.

Follow the steps to wipe a disk-

  1. Open the Wipe Info main window.
  2. Select the ‘Wipe Disk’ in the Wipe Info window.
  3. Click on the ‘disk drive’ option –
  • Select ‘Drive’ to revolve around all the available disks.
  • Put a removable disk to add it to the selected cycle.
  1. Select ‘Wipe Disk’ option.
  2. You need to put a new name on the disk wipe.
  3. Click on the ‘Wipe’ option to delete the selected disk, permanently.

In case you wish to purchase any Norton products, you need to first sign-in into Norton my account page.

Norton Antivirus Compatible With These Operating System And Device

Norton is a quite popular antivirus and anti-malware software which is developed in 1991 by Symantec Corporation. It can effectively keep your system or devices free from any viruses and malware. With the Norton, you can enjoy complete security of your devices along with internet security, antivirus protection, Wi-Fi privacy, mobile security and many more other services. You must get Norton installed in your devices to protect them from all types of external attacks and thefts. Here is the list of the operating systems and devices with which various version of Norton Antivirus is compatible:

Norton Antivirus & Security

Norton Security provides the best protection against any emerging and already existing malware that includes viruses and ransomware. It is compatible with:

All versions of Windows 10 except the Windows 10 SAll versions of Windows 7 (with at least Service Pack 1) and Windows 8/8.1All versions of Windows Vista and Windows XP Home or Professional (32-bit) with at least Service Pack 3.Previous two and Current Version of Mac OSFor Android 4.1 and above iOS 8.0 or later

Norton 360 Protection

Norton 360 Protection is for multiple devices. It is compatible with:

All devices with Windows 10 versions except Windows 10 SWindows 8 and 8.1 as well as Windows 7 (all version with at least Service Pack 1)All devices having Microsoft Windows Vista and Windows XP Home/ProfessionalDevices with current and previous two Versions of Ma OS XAndroid devices with Android 4.1 or later versions

Norton Mobile Security

Norton Mobile Security is best for mobile security. You can download and install it on your mobile phones to keep it safe and secured from malware, virus or theft. It compatible with:

iPhones having iOS 8.0 or later versionsAndroid phones having 4.1 version or later

Norton Internet Security & Norton Antivirus for Mac

This is a special package which is only compatible with the devices running on Mac Operating System X. It must be current or the previous two versions of Mac OS X. But the password management feature is not supported with this.

Norton Internet Security & Antivirus for Windows

This Norton Antivirus software tool is only compatible with different versions of Windows. Though there are also some specific requirements and this is compatible with devices having:

Microsoft Windows 10 OS (all versions are supported except Windows 10 S)All versions of Windows 8 and 8.1All versions of Windows 7 with at least Service Pack 1Windows Vista with Service pack 1 or later Microsoft Windows XP Home as well as Professional with Service Pack 3 or more

Conclusion:
So, any devices with these operating systems can support the specific type of Norton Antivirus and Internet Security tool. With this software, you can expect to find the best security and protection from internet malware and viruses to keep your device safe and secured 24/7. If your device is compatible with the Norton Antivirus, then get it installed in your device. It is the best one available in the market right now as it provides constant update to keep your device protected from all the latest viruses and malware.

Stuck on Split Screen in Safari Browser for iOS and iPad? Exit Now, Here’s How!

The split screen feature has always been invaluable when it comes to accessing and operating two different apps side-by-side. Keeping this in view, Safari released the split screen feature for iPads, where you can read two websites simultaneously. Whether you were using the iPad in a landscape or portrait mode, the websites resize to provide good visibility. But once all the fun and games are done, you would want to switch back to the good old single screen view. While it was easy to enter the split screen mode on Safari, it was exiting this feature that led to users feel trapped. However, it is fairly easy to turn it off.

Steps to Exit Safari Split View by Merging the Split Screens

The first away to exit safari split view is by merging the two screens. Once you follow the steps given below, you can switch over to a single browsing view.

  1. Tap near the top of the Safari icon while your browser is on Safari Split View mode. Alternately, you may pull in the downward direction to reveal the Safari navigation buttons and the URL bar.
  2. Tap and hold the Safari Tabs button. They are depicted by an icon containing two overlapping squares. You will find it in the corner of the Safari window (If you are in split view, you may see two of such icon, you can use any one of these)
  3. Tapping and holding the Safari tabs button will trigger a pop up giving options to close tabs, new tabs, private tab, and “Merge All Tabs.” Click on Merge All Tabs.
  4. The Split Screen View will not transform to a single browser screen.

Steps to Exit Safari Split View by Closing the Tabs

The alternate method to exit from the split screen view is by closing all the tabs. This may be slightly difficult since locating the close button is tough. However, if you wish to use this method, read below to know the steps for this technique:

  1. In the Safari browser of your iPad, pull down to reveal the Safari navigation buttons and the URL bar.
  2. You will notice a faint tiny cross (X) button on the top-right corner. Tap on it to close the Safari tab.
  3. If you have opened multiple tabs in the Safari browser, you may have to keep tapping until all the tabs have closed. Once there is a single tab available, the Safari browser will automatically revert to single page view mode.

About us:

Mr Ariif is a self-professed security expert; she has been making the people aware of the security threats. Her passion is to write about Cyber security, cryptography, malware, social engineering, internet and new media. She writes for Norton security products at www.norton.com/setup